Skip to content
Resin & Jesmonite Workshops - Book Your Spot Now!
Resin & Jesmonite Workshops - Book Your Spot Now!

Epoke Hobby Kit 1.2kg with weighing scale and Mica Powder Pigment

Sold out
Original price Dhs. 0 - Original price Dhs. 0
Original price Dhs. 0
Dhs. 189
Dhs. 189 - Dhs. 189
Current price Dhs. 189

Contents: Resin 900g + Hardener 300g + weighing scale + 12 color Mica Powder Pigment + 2 pairs nitrile Gloves + 4 pcs mixing stick + 2 pcs mixing cups


Mix ratio: 3:1 by weight . Eg 30g Resin and 10g Hardener

Coverage: 1kg of mix covers 10 to 12 SqFt. in 1mm thickness.



  • Clear colourless liquids rendering a Crystal Clear coating or cast when cured.
  • Low to no odour
  • Zero VOC, Zero Solvents, Zero Fumes
  • Non toxic and safe to use indoors (as directed)
  • Self levelling system
  • High Gloss and Crystal Clear finish
  • Highly resistant to yellowing and UV resistant
  • High strength with good flexibility for chip resistance

Important Note - Please read before purchase :

1.Epoke Resin should not be mixed by volume or the end product will not have the expected hardness or durability.

2.Epoke Resin has been designed for working temperatures of 25 to 28 degrees Celsius, if the ambient temperatures are cooler you may need to remove air bubbles using a heat gun.

3.Epoxy Resin in General and Epoke Resin in particular is not full compatible with Acrylic paints and may result in a damaged or cracked end product due to structural changes caused by the inclusion of acrylic. It is best suited for Mica, Resin Pigments or Alcohol Inks.

4. Gloves May come in varied colors ranging from Blue, White or Black.

5. At an ambient temperature of around 28 deg C, you can pour upto 1 inch (26mm) thickness in a single pour, provided your wood is well primed and sealed. If the ambient temperature is higher, the recommended thickness per pour would be lower than 20mm. We would recommend you do some trials to establish what works best in your ambient conditions.

Note: First start with small pours to ensure you have complete control on how the wood and resin react with each other. Larger pours can sometimes be tricky and you may encounter unexpected results for reasons beyond your understanding. Always start small until you have a very good understanding of the resin, wood and other influencing factors. Overcoating can be done in 12 hours after applying the first coat.

Technical Details:

Detail Time Temperature
Pot Life

45 mins

@ 28-32 deg C

Overcoat time

8 to 10 hours

@ 28-32 deg C

Touch dry

6-8 hours

@ 28-32 deg C

Cure to handle

24 hours

@ 28-32 deg C

Full internal cure

72 hours

@ 28-32 deg C